GI “S” Series

GI “S” Series®

INSOLE Material

GI insoles are made from a high-denier, non-woven polyester. When manufacturing the fabric, Stanbee used a special needling process to ensure the material bonds securely to a wide variety of surfaces. It also saturates the material with proprietary resins to ensure strength, durability, flexibility and comfort in wet and dry environments.

 

GI materials are a quality alternative to more expensive insoles. Moisture and perspiration will not degrade or delaminate the material. These insoles provide superior flexibility and cushioning, and can be buffed for a smoother, softer finish.




[ CLICK HERE  FOR PRINTABLE PRODUCT DATA SHEET  ]

SPECIFICATIONS


GRADE & THICKNESS (±5%)

GI-60 S  1.65mm ± 10%
GI-70 S  1.90mm ± 10%
GI-80 S  2.15mm ± 10%
GI-100 S 2.40mm ± 10%
GI-150 S  3.75mm ± 10%
GI-165 S  4.18mm ± 10%
GI-110 ST 2.66mm ± 10%

WORK PREPARATION

Patterns:                 

Manufacturer’s decision


Cutting:                     

Cut selvage-to-selvage to accommodate directional flex.

Can be cut in multiple plies (regulated by grade and equipment used).


LoADING:

Standard procedures as per construction type.


GENERAL INFORMATION

Sheet Size:        101.6cm x 154.9cm (40" x 61")
Area:                    1.883SY – 1.574SM
Packaging:       Pallet load depends on weight of material.
Storage:            Store in a dry area. Shelf life is unlimited.

In order to provide you with the best online experience this website uses cookies. By using our website, you agree to our use of cookies. More Info.
×
Share by: