NITRO FORCE®
Simply put, Nitro Force® is a breakthrough in innovation and sustainability. It fulfills Stanbee’s mission of reducing, reusing, and recycling—while bringing you the lightest, firmest, and most resilient components possible. Consider that Nitro Force®components are made up of at least 85% PET-recycled plastic bottles. Plus, they’re made with a proprietary foaming process that reduces the weight of the material—without sacrificing quality. This is a fully sustainable, waste-free material. Email your pattern to us and we’ll digitally cut your box toes and counters, and then we’ll reuse the waste to make even more Nitro Force® components.
[ CLICK HERE FOR PRINTABLE PRODUCT DATA SHEET ]
SPECIFICATIONS
GRADE & GAUGE (±5%)
| Nitro Force® | 0.8 mm |
| Nitro Force® | 1.0 mm |
| Nitro Force® | 1.2 mm |
WORK PREPARATION
Cutting:
Cut in any direction to maximize yields.
Heat activation:
Bond-line temperature 80°C to 90°C. Recommended 85°C.
Cold mold:
Recommended 0°C to -5°C. Allow sufficient dwell time to secure minimum bond-line temperature of 30°C.
GENERAL INFORMATION
SHEET SIZE:
101.6cm x 152.4cm (40" x 60")
AREA:
1.85SY – 1.55SM
PACKAGING:
500 SHEETS PER PALLET
STORAGE:
Store in a dry area. RECOMMENDED Shelf life TWO YEARS FROM DOM
COMPOSITION
Nitro Force® heel counters are made from at least 85% recycled plastic bottles. Both outer layers have a proprietary hot-melt adhesive that bonds to all uppers—even leathers with a high oil content.
